Items Available in Canada and from USA

Dockery Ford - Mark Donohue - #11B 1965 Shelby G.T 350R Limited Edition - Estimated Production 500 Pieces This is one of the few original 1965 GT 350 "R" models ever produced by Shelby American. The GT350R was the first time an American manufacturer offered a strictly-for-racing competition model which could be purchased from a dealer and which would require nothing after delivery. These cars could literally be delivered directly to the track and raced the way they came off the transport. This particular "R" model was 1 of 2 sponsored by Dockery Ford of Morristown, N.J. for the 1966 season. The Dockery dealership was very involved in racing and wanted a big name driver for their car. So why not go for gold and hire Mark Donahue? Mark entered Dockery's GT350R in nine races during the 1966 season and notched four victories!*Minor changes may occur in final production

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Rat Fink T-Bucket - Mother's WorryLimited Edition - Estimated production 500 pcs Features Include: • Poseable Steering • Plumbed and Wired Engine • Custom purple metallic paint and white pin stripes• Figure and shifter• Wheel stand post (not shown)This model is based off of Ed Roth's famous "Mothers Worry" drawing, and a sticker of the original artwork is included with each model! It's a must have for any Rat fink collector or gear head!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1968 Shelby GT500KR Convertible in Black with White Top Limited Edition - Estimated Production 750 Pieces Features include: • Opening doors, hood and trunk • Removable top and boot • Poseable steering • Folding front seats • Plumbed and wired engine • Full chassis detailing Famed American automotive designer, racing driver and entrepreneur Carroll Shelby partnered with Ford to build Mustang-based performance cars. The result of their collaboration was the Shelby GT350 in 1965. By 1968, the car had evolved to the GT500 and would see the first convertible built in the series. This '68 Shelby GT500 is also the more limited KR, which stood for "King of the Road", including a decked out 428 cubic inch Cobra Jet V8.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Reynolds Ford - 1965 Shelby GT350 Limited Edition - Estimated Production 500 Pieces Features include: • Opening doors, hood and trunk • Poseable steering • Plumbed and wired engine • Race interior• Detailed undercarriage A Texan, a racer and a sportscar builder, Carroll Shelby joined forces with the Ford Motor Company in 1965 to create the ''father of muscle phenomenon'', a tremendous version of the Mustang that was made to tear up the racetrack, as well as cruise the streets.Ford commissioned Shelby to create a Mustang to compete in the SCCA B-Production Championship. Thanks to various weight-saving measures, the GT350 tipped the scales at 224 lbs. less than a regular V8-engined Mustang. Performance was further improved thanks to an array of chassis modifications and a tuned 306bhp motor.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Berejik Olds - 1970 Oldsmobile 442 W30 Limited Edition - Estimated Production 500 pcs Features and Details: • Opening doors, trunk, and hood • Poseable steering • Plumbed and wired engine • Tilting front seats • Detailed undercarriage • Seralized plate first sample images - final product will vary slightyDick Smothers, of the Tom and Dick Smothers comedy team, was the driving force behind their hit television series and their racing ventures. Hurst's Shifty Doctor, Jack Watson, helped prepare the Smothers' car. With a cameraman and equipment on board, Dick netted a 12.99 on his third pass in the car. George Berejik received a call from the Smothers brothers' lawyer prior to the 1971 NHRA Nationals, telling him that he had been dropped by the Smothers and that the Smothers name and logo had to come off the car. The Berejik team went to Indy and paid $600 to have the name and logo removed. They finally got to the gates, where the Smothers were waiting and told them that the lawyer was misinformed and to get the lettering back on the car. Berejik then spent $700 to have the name repainted! The Smothers deal lasted until the end of the 1971 season, when Oldsmobile pulled the plug. Loyed "Woody" Woodland, seen here running F/SA at Maple Grove, banged off 11.60s on a 12.20 F/S record!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Shake Rattle & Run Tribute - 1957 Chevrolet Bel Air GasserLimited Edition - Estimated Production 500 pcs Features and Details: • Opening doors, hood, and liftoff hood • Poseable steering • Injected drag engine • Straight axle front end • Detailed chassis • Cragar drag wheels and tires • Serialized plate first sample images - final product will vary slightyBack in 1959, Dick Messino and Eric Schmidt were hanging around a guy named Paul Cline. Cline had gotten a 1957 Chevrolet Bel Air for a graduation present. It was white with red and white interior, a power pack combo of a 220hp 283, and a 3-speed trans. It wasn't long after hanging out with Dick and Eric that the car was doing a lot of street racing.Shake, Rattle & Run '57 Sport Coupe became a feared Midwest drag strip staple for decades. Definitely an original "Axle Car"!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1971 Pontiac GTO Judge Convertible in Orbit Orange - The Last Ram Air Judge Made! Limited Edition - Estimated Production 600 Pieces Features Include: • Opening doors • Poseable steering • Highly detailed 455 engine • Detailed interior with folding seats • Individually serialized In the winter of 1970, a Mr. Wayne Hagen caught wind of some rattling news: the Judge was retiring. In this case, no political figure was stepping down but rather Pontiac's sportster of the same name. "He wanted one his whole life but couldn't swing it financially,' recalls his wife, Mary. "Realizing this would be his last chance to get one, he figured he should get moving." In April of 1971, the lovebirds swung by Hansord Pontiac, in Minneapolis, only to be greeted with a terrible announcement: they were too late. "The sales staff said sadly we had missed the boat in getting in an order,' recalls Mary. Officially, the Judge was discontinued in February and here it was nearly a month later. "We told them we weren't interested anymore and started to leave,' said Mary. "Before we could get to the door, they said they would call up Pontiac and ask if they'll make one more." Further pressing their luck, the Hagens had a special request: the car needed to be painted in their favorite color, Orbit Orange. "We had to have one in that color, we just loved it,' gushed Mary. Easier said than done, that vibrant hue was no longer available for the 1971 model year. Still, eager for a sale, the dealership put in a special paint

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1969 Chevrolet Copo Camaro in Silver with Black Stripes Limited Edition of only 228 pcs! Features and Details: • Opening doors, trunk, and hood • Blacked out custom wheels and tires • Detailed dashboard and cloth seatbelts • Wired and plumbed Chevy engine • Nos tank added to truck • Poseable steering • Detailed interior • Diecast metal body • Limited Edition of strictly 228 pcs

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

#98 BP Ken Miles - 1965 Shelby GT350R Prototype - "The Flying Mule" Features Include: • Opening doors, hood, and trunk • Poseable steering • Race cage and seats • Plumbed and wired engine • Detailed undercarriage • Limited Edition

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1970 Chevrolet Chevelle SS Convertible Restomod in Yellow with Black StripesFeatures Include:• Opening doors, trunk, and hood • Removeable top and boot • Poseable steering • Tilting front seats with cloth belts• Fully wired and plumbed big block 454 engine • Detailed chassis • Detailed interior • Serialized plate • Limited edition - estimated production of 750 pieces

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Yenko Super Cars - 1967 Chevrolet C-30 Ramp Truck in Silver Limited Edition - Estimated Production 400 pcs Features Include:• Sealed Diecast Body • Poseable Steering • Fully Detailed Interior • Adjustable Wheel Chocks • Slide Out Ramps • Detailed Chassis • Rubber Tires

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1965 Shelby GT350R in Blue - Pro Touring Limited Edition - Estimated Production 504 Pieces Features include: • Opening doors, hood and trunk • Poseable steering • Plumbed and wired engine • Race interior • Detailed undercarriage • Serialized plate first sample images - final product will vary slighty

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1970 Chevrolet Chevelle LS6 SS in Shadow Grey with Black Interior Limited Edition - Strictly Limited to 300 pcs Features and Details: • Opening doors, hood, and trunk • Poseable steering • Plumbed and wired 454 engine • Detailed undercarriage • Detailed dashboard • Folding front seats • Cloth seat belts • Diecast metal body • Serialized Plate

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Terlingua Tribute - #65 1965 Shelby GT350R Limited Edition - Estimated Production 400 Pieces Features include: • Opening doors and hood • Poseable steering • Detailed Interior • Cloth seatbelts • Plumbed and wired engine • Roll cage • Detailed chassis • Race exhaust • Serialized plate

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Don Grotheer - 1967 Plymouth Belvedere II Super Stock in White Limited Edition - Estimated Production 400 pcs Features Include: • Opening doors, trunk, and hood • Poseable steering • Plumbed and wired 426 HEMI engine • Detailed interior • Diecast metal body first sample images - final product will vary slightyDon Grotheer may not be a household name, but he was a Super Stock NHRA/AHRA heavy hitter during the 1960s. Grotheer started racing a black '63 Plymouth followed by a white '63 Plymouth AA/Stock eliminator in 1965. He was able to win the AA/S championship, which caught the attention of Bob Cahill, product planner, and manager of Chrysler's drag racing program. Cahill provided Grotheer a parts contract. Grotheer was also enlisted to conduct performance clinics at Chrysler dealerships (along with Sox & Martin and Dick Landy) and he did over 75 of them.He was also a pioneer of the Pro Stock class in its infancy. In 1967, Grotheer raced a '67 Plymouth Belvedere and won the Winternationals class eliminations, securing another Division Championship. Grotheer went on and won again in 1967 then again at the '69 Winternationals in his Super Stock/B Automatic Cuda with B&M "secret weapons" transmission parts and "race-stall tork-converter." Always an innovator, he continued to race for many more years.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

So-Cal Speed Shop - 1932 Ford Hot Rod Pickup in Red and White Limited Edition - Estimated production is 400 Pieces Features Include: • Opening doors, hood, and tailgate • Poseable steering • Wired and plumbed Chevrolet engine • Detailed interior • Detailed chassis • Diecast metal body • Serialized plate first sample images - final product will vary slightyUnlike many tales, the story of the So-Cal Speed Shop is not one made up by some clever marketing types; it's a true story of friendship, hot rods and the need for speed. The story begins on March 22, 1922, in Los Angeles, California, with the birth of Alex Xydias. Although his father was a prominent producer of silent movies, Alex's childhood was fairly normal, and like most young boys, he naturally gravitated towards automobiles. His first hot rod, a '29 Ford roadster with a milled head and a chopped flywheel, which he drove to Fairfax High School, was paid for with part-time earnings. However, his life, like that of so many young men, was about to change when, in 1942, he joined the Army Air Corps, serving as a B-17 engineer. On the day of his discharge-March 3, 1946-using some borrowed money, Alex opened the first So-Cal Speed Shop on Olive Avenue in Burbank. Over the following decades, So-Cal Speed Shop would build some of the most iconic hot rods for many of the most notable collectors on the planet. Their innovation and attention to detail set the bar in the hot rod industry.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1969 Chevrolet Camaro Z/28 in Carolina Blue Limited Edition - Estimated Production 504 pcs Features Include:• Opening doors, trunk, and hood • Poseable steering • Detailed 427 engine • Detailed interior • Diecast metal body • Serialized plate Actual car photo, final production model may vary The third and final model year for the first-generation Chevrolet Camaro was 1969. It would also prove to be the highest production year of the first generation, with 243,085 copies leaving the factory. These 1969 Chevy Camaro Z/28's are believed to be two painted a rare special-order hue known as Carolina Blue (this was GMC fleet light blue). The Chevrolet Camaro for 1969 had a host of aesthetic changes, with front fenders, rear quarters, rear panel, header, valance, and doors all receiving design tweaks. Wheel wells were flattened for a more aggressive look, and the standard grille had a new look, with sharper angles. Outfitted with a high-revving 427 engine with dual exhausts, these Z/28 Camaros provided the driver with powerful performance.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1965 Shelby GT350R Prototype in White NEW TOOLING Limited Edition - Estimated Production 500 Pieces Features include: • Opening doors, hood and trunk • Poseable steering • Plumbed and wired engine • Race interior • Detailed undercarriage Actual car photo, final production model may varyWhile Shelby was diving deep into the the development of the GT40 for LeMans, he also had his sights on Ford's Mustangs. He wanted to turn Ford's secretary sports car into a track champion. So, Ford sent him three white K-code 1965 Mustangs. Serial number 5R002 would become the very first GT350R prototype and is arguably the most important Mustang in history! 5R002 would have multiple parts tested on it with drivers such as Ken Miles and Bob Bondurant behind the wheel, fenders widened by hand, the famous rear window designed by Peter Brock that let air escape, reverse hood scoop, and so much more! 5R002, aka the "Flying Mustang", would win its first race it ever entered on February 14,1965 with Ken Miles piloting the car to victory. Miles and others would compile 10 wins with 5R002 throughout the season with Jerry Titus capturing the SCCA B Production Championship for 1965!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Don's Speed Shop - 1970 Dodge D-300 Ramp Truck Limited Edition - Estimated Production 400 pcs Features Include:• Sealed Diecast Body • Poseable Steering • Fully Detailed Interior • Adjustable Wheel Chocks • Slide Out Ramps • Detailed Chassis • Rubber Tires first sample images - final product will vary slighty Donald Glenn "Don" Garlits (born January 14, 1932, Tampa, Florida) is an American drag racing driver and automotive engineer and is considered the father of drag racing. He is known as "Big Daddy" to drag racing fans around the world. Always a pioneer in the field of drag racing, he perfected the rear-engine "top fuel dragster design", an innovation motivated by the loss of part of his foot in a dragster accident. This design was notably safer, since it put most of the fuel processing and rotating parts of the dragster behind the driver. The driver was placed in "clear air," in front of nearly all the mechanical components, thus protecting the driver and allowing him to activate a variety of safety equipment in the event of catastrophic mechanical failure or a fire. Garlits was also an early promoter of the full-body, fire-resistant driver's suit - complete with socks and gloves, often branded as Nomex. Garlits was the first drag racer to officially surpass the 170, 180, 200, 240, 250, and 270 miles per hour marks in the quarter mile; he was also the first to top 200 in the 1/8 mile. He has been inducted into several Halls of Fame and has won many awards during his career.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Southern Speed and Marine - 1970 Plymouth GTX Drag Car Limited Edition - Estimated Production 400 Pieces

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1970 Oldsmobile 442 W-30 in Special Order Paint Color Plum Crazy Limited Edition - Estimated Production 504 pcs Features and Details: • Opening doors, trunk, and hood • Removable top and boot • Poseable steering • Plumbed and wired engine • Tilting front seats • Detailed undercarriage • Seralized plate first sample images - final product will vary slightyIn the grand muscle car era, Oldsmobile offered the beefed up the 442 to offer to a performance hungry population. But Olds did not stop there as they rolled out an even more exciting performance packaged called the W30. Thanks to a special-order color that many muscle car enthusiasts would describe as sacrilegious, a 1970 442 was finished in Plum Crazy! Olds allowed dealers to commission special-order paint for $50 (about $400 as of 2023). A dealer in Virginia Beach took advantage of this option as he wished to have a custom piece in his showroom and placed the order for the Plum Crazy color scheme. This extremely rare Oldsmobile packs all the factory W30 goodies with white stripes and a white convertible top.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Big Daddy Ed Roth's Custom Paint Shop - 1957 Chevrolet Bel Air Limited Edition - 750 pcs Features include: • Opening doors, trunk, and hood • Detailed V-8 engine • Detailed interior • Two-tone upholstery • Poseable steering • Diecast body Ed Roth painted this '57 Chevy in a custom paint scheme to help promote his California pin striping shop. It was the perfect ride to blazon his name down the side of in flaming letters. For 1957, the New Bel Air model was equipped with a fresh 283ci V-8. Additionally, Bel Air had reached the peak of refined retro elegance.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Rat Fink - 1961 Chevrolet Corvette Gasser in Metallic Gold with Rat Fink Graphics Limited Edition - Strictly Limited to 500 Pieces Features: • Opening doors and hood sides • Poseable steering • Plumbed and wired engine • Tilting front seats • Detailed undercarriage • Serialized plate This gasser is chromed out from the engine to the wheels and finished off with a bright gold metallic paint job! This model is based off of Ed Roth's famous "the Fugitive Vette" drawing.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1968 Shelby GT500 KR in Candy Apple Red - King of the Road - 1968 Shelby Ad Car Limited Edition - Estimated Production 750 Pieces Features Include: • Opening doors, trunk, and hood • Poseable steering • Front tilting seats • Plumbed and wired engine • Detailed undercarriage • Printed Ad included with each model!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1968 Chevrolet Camaro Z/28 - Drag Outlaws Limited Edition - Strictly Limited to 427 pcs Features and Details: • Opening doors and trunk • Removeable hood • Poseable steering • Wired and plumbed big block 496 • Tilting front seats • Nitrous bottle • Wheelie bar and parachute included

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1968 Plymouth Cuda Super Stock - Arlen Venke - East Town Limited Edition - Estimated Production 500 Pieces Features Include: • Opening doors, hood, and trunk• Poseable steering• Injected HEMI engine• Detailed interior • Diecast metal body• Serialized plate "Akron" Arlen Vanke was a working-man's drag racer. Competing, and winning, in the Stock, Super Stock and Pro Stock classes, he set records with Pontiacs and, later, Plymouths, earning multiple Stock Eliminator titles with both marques. Through it all, he built the cars in a backyard garage and often drove his open ramp truck to the track and back. In fact, Chrysler hired Vanke to test their performance technology. In 1967, Arlen modified the RO23 Hemi intake manifold for racing. "NHRA rules allowed racers to modify the intake manifold, so I made the stock manifold into a plenum chamber manifold, " he said. Vanke's Hemi, along with the Sox & Martin team, gave Mopars so many victories in the late '60s that they dominated the scene in Super Stocks. In 1968, he built this incredible HEMI Cuda that we are so proud to offer. He won the Nationals in August at Indy running SS/B with his 1968 Plymouth Hemi Cuda. He then reset the record again with a 10.61 at 140 miles per hour in the Cuda in SS/A at the Winternationals in Pomona, California.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

ACME Rocket Sled - 1940 Gasser Limited Edition - Estimated Production 402 Pieces Features: • Opening doors, removable cowl • Poseable steering • Injected HEMI engine • Fully detailed interior • Diecast metal body • Serialized plate first sample images - final product will vary slighty

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

#6 Gulf - 1965 Shelby GT 350R - Gulf Racing Tribute Limited Edition - Estimated Production 500 Pieces Features: • Opening doors, hood, and trunk • Poseable steering • Detailed interior • Racing seat • Plumbed and wired engine • Serialized plate This 1965 Shelby GT 350R in the famous Gulf livery is a tribute to the amazing success of the Carroll Shelby and the Ford teams that competed and dominated the competition throughout the late 60's, in tracks the world over with their cars wrapped in the famous powder blue and orange!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1932 Ford Hot Rod Pickup in Metallic Cotton Candy Grand National Deuce Series #7 Limited Edition - Estimated production is 600 Pieces Features Include: • First release with fenders • Opening doors and tailgate • Poseable steering • Magnetic moon wheel covers • Wired and plumbed Ardun engine • Detailed interior • Detailed chassis • Diecast metal body • Serialized plate

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Warbucks - 1965 Ford Mustang A/FX - Phil Bonner Limited Edition - Estimated Production 750 Pieces Features include: • Opening doors and trunk • Lift-off hood • Poseable steering • Titling front seats • Race cage • Plumbed and wired engine • Drag wheels and tires • Serialzied plate

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.