Items Available in Canada and from USA

Police - Ford Ranger Raptor Pickup TruckThe Police Raptor demonstration vehicle modelled was converted by Ford’s Special Vehicle Preparation Team in Essex during 2019, shortly after the Raptor was launched. The base vehicle cab was stripped down to gain access to the roof and dash areas so it could be fitted with an all-LED blue light and search light facility, plus a sophisticated communications system and ANPR capability. It was then finished with the high performance Battenburg livery now used by all UK police vehicles. The Raptor’s 2-litre Bi-Turbo Ford EcoBlue diesel engine, which develops 500 Nm of torque, was left standard as was the four-wheel drive system which distributes all that torque to BF Goodrich K02 33-inch all-terrain tyres.This high-profile vehicle has been loaned to a number of police forces for evaluation prior to possible purchasing and has been used by many Police Rural Crime teams. It was found to be especially useful in tackling hare coursing and farm thefts where off road pursuits across farmland are required, an unusual task to which the high-performance Raptor is particularly well suited. The vehicle is designed to tackle fearsome terrain with ease while leaving the occupants comfortable and alert thanks to its race-bred off-road FOX Pro suspension. The Baja desert race mode setting improves the vehicle’s high-speed off-road performance, while the impressive 10-speed automatic transmission makes sure the Raptor is always in the right gear at the right time, whatever the conditions.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Mammoet - Liebherr LTM 1030 Mobile Crane Features and Details: • 4-axle crane with all-wheel steering • Outriggers extend and support feet lower • Integrated assembly and load cable winch • Upper carriage rotates 360° • Telescopic lattice tower with three-part folding boom • Foldable bracing trestles and bracing rods • Detailed operator's cabin Limited Edition with just 500 pieces producedCertificate IncludedEach Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Coquoz - Liebherr R922 V Hydraulic Excavator Features and Details: • Upper carriage is rotatable 360 degrees • Fine-linked moving metal tracks • Functional model with numerous moving parts • Finely detailed hose lines, handrails, and railingsEach Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Peterbilt 377 A/E Classic Tractor - Plastic Model KitSkill level 3, paint and glue requiredCab onlyFeatures include: • 285 parts with expanded decal sheet with all new stripes, graphics, logos and more • Molded in white, sliver, grey, black and clear with chrome plated parts and black vinyl tires • Unibilt sleeper with aerodynamic sleeper extenders • Functional fifth wheel • Detailed Detroit Diesel 60 series 420 Horsepower engine • Tilting hood

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1962 Chevrolet Corvette - Plastic Model Kit Skill Level 2, paint and glue requiredFeatures include: • 154 parts molded in white, clear, and clear red, with chrome plated parts • Thermoplastic rubber tires • Steerable front axle • Detailed engine • Opening hood • Super-detailed interior • Collectible vintage-style packaging

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Lockheed C-130 Hercules Transport - Blue Angels "Fat Albert"Postage Stamp CollectionThe C-130 Hercules is a medium/long-range versatile combat transport aircraft. The C-130’s reputation is that of a workhorse and it remains one of the most widely used transport aircraft by military forces worldwide. The world famous Blue Angels, a United States Navy Flight Demonstration Squadron, use their C-130, nicknamed “Fat Albert” for logistics purposes, in order to ferry spare parts, equipment and support personnel between air shows. This Die-cast metal airplane model comes in 1:200 scale with plastic stand and is approximately 6 inches long with 7 3/4 inch wingspan.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1959 Cadillac Ambulance with Gurney - Plastic Model Kit Skill level 2, paint and glue requiredFeatures: • 82 part set • Molded in white, clear, transparent red, and chrome-plated parts • Black vinyl tires • Metal axle • Built size: 10 inches long

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1992 Toyota 4 x 4 Pickup Truck - Plastic Model KitFeatures: • 1/25 Scale • Skill level 2 • Paint and glue required • Build TWO complete cars • Molded in white and chrome • Customizing and Racing parts AMT’s 1925 Ford Model T is a value packed modeling bonanza! It’s loaded with enough parts to build two complete replicas, including a stock T roadster and a chopped-body rat rod custom! A huge selection of gleaming chrome parts, pre-lettering drag slicks and whitewall tires are all included. Best of all, a huge customizing decal sheet with many graphic logos and options allow any modeler to customize and personalize their model and build something they can truly be proud of. It even includes optional tinted window parts! Collectable vintage-style packaging artwork will excite the minds and hands of builders and collectors alike!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Liebherr LTM 1030-2.1 Mobile Crane Features and Details: • 4-axle crane with all-wheel steering • Outriggers extend and support feet lower • Integrated assembly and load cable winch • Upper carriage rotates 360° • Telescopic lattice tower with three-part folding boom • Foldable bracing trestles and bracing rods • Detailed operator's cabin Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Western Star 4964 Tractor - Plastic Model KitSkill level 3, paint and glue requiredFeatures include: • Over 60 Chrome parts including quarter fenders, fuel tanks, side mirrors, and air horns • Over 285 parts with expanded decal sheet with all new stripe graphics, logos and more • Ten soft hollow thermoplastic rubber truck tires • Plated wheels • Steerable front axle • Functional fifth wheel • Sleeper compartment • Tilting hood • Paint and cemet not included

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

"Our Fallen Heroes" Mercier Transport - Mack Pinnacle with Minimizer Parts and Wilson Pacesetter 43' High-Sided Grain Trailer Mercier Transport LLC. was created to haul commoditiessuch as corn and soybeans. The company was created bythe owners, Ralph and Dylan Mercier. Over the course ofmaking the company, they decided to wrap the truck torecognize both Father & Son’s passion and dedication forfirefighting. Mercier Transport is now the proud owner ofthe “Our Fallen Heroes” Rolling Memorial, rememberingthose who have died in the line of duty. * DCP by First Gear

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Liebherr R 938 V Hydraulic Excavator Features and Details: • Upper carriage is rotatable 360 degrees • Fine-linked moving metal chains • Functional model with numerous moving parts • Finely detailed hose lines, handrails, and railings • Stone guard on cab • Boom with quick couplerEach Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Mack Pinnacle with Minimizer Parts and Talbert 5553TA Traveling-Axle Trailer in Orange and Fuchsia Features and Details: • Diecast metal replica • Accurately detailed cab interior • Pivoting fifth-wheel for trailer attachment • Working trailer landing gear • Detailed undercarriage and chassis * DCP by First Gear

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Ten-Car Acrylic Display CaseNow you can display the best of the best of your collection with these new crystal clear display cases from Auto World!• Compartment dimensions: 9.125” L x 14.625" W x 2.875" H• Designed to hold 10 die-cast or model cars of many styles & brands - Race cars, muscle cars, antique cars, exotics.• Clear display cases are made with thick 1/4” acrylic• Stackable and wall mountable cases include mounting screws and screw covers for that clean invisible look• Front panel opens for easy access with magnetic closure for a secure display • Crystal clear means high visibility & mirrored back gives a better view

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Alaskan Hauler Kenworth Tractor - Plastic Model KitSkill level 3, paint and glue requiredCab onlyFeatures include: • Over 300 plastic and metal detailed parts • Sleeper cab • Air Ride drivers seat • Decal sheet • Detailed instrument panel • Authentic rear fenders • Cargo lights • Black vinyl tires

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Tasca Ford 1965 A/FX Mustang Limited Edition - Estimated Production 996 Pieces New parts include but not limited to: • Heavily Detailed Chassis Showing the Unique A/FX Suspension • Fully detailed Interior • Drag Wheels and Tires • SOHC 427 Engine • Full sized spare and battery located in the trunk • and so much MORE!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Avro Lancaster Mk 1 Bomber RAAF - NX611 "G for George"Postage Stamp Collection"G for George" is an Avro Lancaster Mk I bomber, squadron code AR-G and serial number W4783, operated by No.460 Squadron RAAF during World War II. It is now on permanent display at the Australian War Memorial in Canberra, Australia."George" flew almost 90 combat missions over occupied Europe with No.460 Squadron, and its second most prolific surviving Lancaster, behind "S for Sugar" of No. 467 Squadron RAAF (137 operations). Most operational Lancaster were shot down before they had reached 20 operations.Upon its retirement from combat duty in 1944, "George was flown to Australia by an all-RAAF crew of Bomber Command veterans. The bomber played a major part in raising War Bonds during a round-Australia publicity trip. After the war, it stood in the open air at RAAF Base Fairbairn, its fate uncertain, before being moved to the Australian War Memorial in 1955.This Die-cast metal airplane model comes in 1:150 scale with plastic stand and is approximately 5.5 inches long with 8 inch wingspan.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Fire Department - Mercedes Magirus DLK 23/12 Fire Truck in Red and WhiteCab is diecast metal, chassis is plastic.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Caterpillar 798 AC Mining Truck - High Line Series Features and Details: • Authentic Cat Machine Yellow paint • Authentic Cat trade dress • Detailed cab interior with removable operator figure • Opening left and right cabin doors • Truck bed raises and lowers on two-stage cylinders • Opening engine compartment and engine detail • Front wheel steering with working linkage • Rear suspension • Tread and pattern detail on all visible metal surfaces • Transmission detail • "rock knockers" on rear tires • Removable wheel chocks included • Metal grab bars, railings, and other trim detail • Folding ladders • Authentic tire tread pattern High Line Series Packaging: Each model is surrounded by a die-cut foam insert within a collectible, full-color printed metal box which features actual machine photos and specifications. A cardboard outer box, which is printed with the stock number and description, adds further protection as well as easy identification of each item in your High Line Series collection.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1964 Mercury Marauder Hardtop - Plastic Model Kit Skill Level 2, paint and glue requiredFeatures include: • Over 170 parts molded in white, clear, and clear red, with chrome plated parts • Thermoplastic rubber tires • Steerable front axle • Detailed engine • Opening hood • Super-detailed interior • Collectible vintage-style packaging

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1969 Pontiac Grand Prix Hardtop in Matador RedFeatures Include:• Opening doors, hood and trunk• Accurate interior and chassis• Steerable front wheels• Detailed engine The Pontiac Grand Prix entered its second generation with an all-new redesign for 1969. It wasn’t just a refresh of the 1968s, it was a complete ground-up rework of the giant muscle-yacht. It was a purpose-built car as envisioned by John Deloreon, the general manager of GM’s Pontiac Motor Division of the time. Deloreon wanted to capture the entire experience of old luxury marques like Duesenberg, Cadillac, and Packard of the 1930s. Monikers like J and SJ, properly befit the Grand Prix name.Royal Pontiac, of Royal Oak, MI was already well known to enthusiastically dabble in the domain of Pontiac performance. The Grand Prix was no exception, despite its massive size. With a hood-mounded tachometer, Royal optioned these 4000lb cars with the 428 H.O. 4bbl engine rated at 390hp. They spun the same camshaft as the Ram Air III engine in the GTO with compression of 10.75:1. It was a formidable machine on the street, but didn’t look the part. Many “muscle” cars that dared to challenge were only viewed in the Grand Prix’s rear view. Only 12 of these Matador Red Royal Bobcat Grand Prix models were ever built in 1969.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Liebherr MK 88-4.1 Mobile Construction Crane Features and Details: • Finely detailed diecast replica • All-wheel steering • Telescopic outriggers • Rotating upper carriage • Integrated assembly and load cable winch • Telescopic lattice tower with 3-part folding boom • Foldable guy blocks and guy rods • Trolley, crane hook, and winch included Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Mercedes-Benz Arocs with CIFA K36L Concrete Pump Features and Details: • 5-part folding mast • 360° rotating joint on last section • Steerable front axle • Double rear axle mounted on oscillating bearings • Swiveling front support and swiveling rear support Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Western Star 4900 SF Day Cab Tandem Tractor in Maroon and Gray with OOCL 40' Dry Good Sea Container Truck Details: • Diecast metal replica • Detailed cab interior • Authentic paint color • Opening hood and doors • Detailed engine compartment • Detachable chassis trailer and container Container Details :• Highly detailed plastic replica • Authentic livery • Opening doors • Locator / stacking pins • Detailed exterior

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

IH Paystar 5000 Dump Truck - Plastic Model KitSkill level 3, paint and glue requiredFeatures include: • Over 300 plastic and chrome plated parts, molded in authentic IH colors • Highly detailed black vinyl tires on steerable front end • Water release decals • Functional dump body with double action dump gate • Accurate cab interior • Highly detailed IH-V-800 Turbocharged engine • Paint and cement required

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

2021 Ford Bronco 1st Edition - NEW TOOLING - Plastic Model Kit Skill level 2, paint and glue requiredFeatures include• 114 parts molded in white• Removable hardtop• Off road tires

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1969 Ford Shelby GT500 Mustang 2+2 in Royal Maroon - MCACN (Muscle Car and Corvette Nationals)Features Include:• Opening doors, and hood• Accurate interior and chassis• Steerable front wheels• Detailed engine Formerly owned by The Brothers Collection, and a handful of owners before that, this hidden gem remained in great condition with all its original sheet metal from top to bottom. All previous owners preserved a variety of reports, receipts, and printed materials detailing its history. Adding to its distinction, this 1969 Shelby GT-500 is fully-documented as one of the first 100 built. Under the hood is the original Cobra Jet V8 with the VIN to match. Specific to the Shelby is the fiberglass body panels, front bumper, grille, headlights, and 5-scoop NACA duct hood. Already in amazing condition, it was restored to show quality and displayed on the red carpet at MCACN in 2019, attracting high-praise from even the most particular Shelby connoisseurs.Auto World has replicated this award-winning 1969 Shelby GT-500 in highly-detailed 1:18 scale. We’ve painted it in factory-matched Royal Maroon, with white GT-500 stripes, white bucket seat interior, and even included the eye-catching red footwell carpeting. Rounding out the details is the properly-detailed 428 Cobra Jet engine mated to a 4-speed manual. Auto World is proud to replicate this special 1969 Shelby GT-500 for your muscle car collection.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Caterpillar D5 LGP Fire Suppression Dozer - High Line Series• Detailed cab interior, including operator• Authentic Cat Machine Yellow paint • Realistic metal tracks • Highly detailed dozer blade • Opening engine compartment and engine detail • Ripper raises and lowers• Roof lifts off for cabin access High Line Series Packaging: Each model is surrounded by a die-cut foam insert within a collectible, full-color printed metal box which features actual machine photos and specifications. A cardboard outer box, which is printed with the stock number and description, adds further protection as well as easy identification of each item in your High Line Series collection.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Fire Department Ladder Truck - Corgi Chunkies SeriesCorgi Chunkies is a completely new series of fantastic toys with moving interactive parts, free-rolling, soft-tired wheels, and a strong child-proof build.Made of Diecast Metal and Durable Plastic

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Coca-Cola -1968 Chevrolet El Camino SS - Plastic Model Kit Skill Level 3, paint and glue requiredFeatures include: • 118 parts molded in white, with some clear, clear red and chrome plated parts • Metal axles • Black pad printed tires • Decal sheet included • Full color Coca-Cola Display base

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.