Items Available in Canada and from USA

John Deere Applicator and Anhydrous Tank - Big Farm SeriesFeatures includes• Hitch works with most 1:16 tractors• Folding frame• Free-rolling wheelsMade of durable plastic

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Applicator and Anhydrous Tank - Big Farm SeriesFeatures includes• Hitch works with most 1:16 tractors• Folding frame• Free-rolling wheelsMade of durable plastic

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Wiesbauer - Demag AC45 City Crane Features and Details: • Includes two-section folding jib extension • Detachable bumper protection for realistic transport configuration • Fine photo-etch storage underneath the body for all four outrigger pads • Ladders can be stowed for transport and folded out for lifting mode • Proportional steering and smooth turning axles

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Tadano AC 7.450-1 Mobile Crane Features and Details: • Upper stucture cab can be raised and lowered • Realistic steering for road travel, manual steering and crab mode • Realistic interior design including door panels, back wall and steering, operating sticks, TV monitor and dashboard • Fully Functional and removable SSL system • Mainboom cylinders made from brass to ensure a high-quality functionality • Boom extends up to 6 times • Ladders can be stowed for transport and folded out for lifting mode

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1971 Pontiac GTO Judge Convertible in Orbit Orange - The Last Ram Air Judge Made! Limited Edition - Estimated Production 600 Pieces Features Include: • Opening doors • Poseable steering • Highly detailed 455 engine • Detailed interior with folding seats • Individually serialized In the winter of 1970, a Mr. Wayne Hagen caught wind of some rattling news: the Judge was retiring. In this case, no political figure was stepping down but rather Pontiac's sportster of the same name. "He wanted one his whole life but couldn't swing it financially,' recalls his wife, Mary. "Realizing this would be his last chance to get one, he figured he should get moving." In April of 1971, the lovebirds swung by Hansord Pontiac, in Minneapolis, only to be greeted with a terrible announcement: they were too late. "The sales staff said sadly we had missed the boat in getting in an order,' recalls Mary. Officially, the Judge was discontinued in February and here it was nearly a month later. "We told them we weren't interested anymore and started to leave,' said Mary. "Before we could get to the door, they said they would call up Pontiac and ask if they'll make one more." Further pressing their luck, the Hagens had a special request: the car needed to be painted in their favorite color, Orbit Orange. "We had to have one in that color, we just loved it,' gushed Mary. Easier said than done, that vibrant hue was no longer available for the 1971 model year. Still, eager for a sale, the dealership put in a special paint

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1971 Dodge Challenger R/T in Bright White with Blue Stripes Limited Edition - Estimated Production 600 Pieces Features Include: • Opening doors, hood, and trunk • Poseable steering • Fabric seatbelts • Plumbed and wired 383 magnum engine • Folding front seats • Fully detailed interior • Serialized plate

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Warnow Crane - Liebherr MK 88-4.1 Mobile Construction Crane Features and Details: • Finely detailed diecast replica • All-wheel steering • Telescopic outriggers • Rotating upper carriage • Integrated assembly and load cable winch • Telescopic lattice tower with 3-part folding boom • Foldable guy blocks and guy rods • Trolley, crane hook, and winch included Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Mammoet - Liebherr LTM 1030 Mobile Crane Features and Details: • 4-axle crane with all-wheel steering • Outriggers extend and support feet lower • Integrated assembly and load cable winch • Upper carriage rotates 360° • Telescopic lattice tower with three-part folding boom • Foldable bracing trestles and bracing rods • Detailed operator's cabin Limited Edition with just 500 pieces producedCertificate IncludedEach Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Felbermayr - Liebherr LTM 1110 - 5.1 Mobile Crane Features and Details: • Steerable axles • Telescoping outriggers • Extendable support legs • Detailed operator's cab • Tilting operator's cab • Foldable access ladders • Detailed undercarriage • Upper carriage rotates 360° • Telescopic boom is lockable in three positions • Includes hook block and single line hook • Finely detailed graphics • Detailed grab rails and textured walking surfaces • Material box at rear • Maximum height with lattice jib reaches 165 cm or 65 inches Boom must be fully extended before being retractedEach Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Mercedes-Benz Arocs 3-Axle Truck with Liebherr 36 XXT Concrete Pump Features and Details: • Steerable front axle • Oscillating rear double axles • Pivoting front outrigger and swing-out rear outrigger • Concrete pump superstructure fold out boom Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Liebherr LTM 1030-2.1 Mobile Crane Features and Details: • 4-axle crane with all-wheel steering • Outriggers extend and support feet lower • Integrated assembly and load cable winch • Upper carriage rotates 360° • Telescopic lattice tower with three-part folding boom • Foldable bracing trestles and bracing rods • Detailed operator's cabin Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Koninklijke Saan - Liebherr MK 88 Mobile Construction Crane Features and Details: • Diecast metal replica • Independent steering on all axles • Upper carriage rotates 360° • Integrated assembly and load cable winch • Telescopic lattice tower • 3-section boom unfolds • Detailed operator's cab Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Caterpillar 798 AC Mining Truck - High Line Series Features and Details: • Authentic Cat Machine Yellow paint • Authentic Cat trade dress • Detailed cab interior with removable operator figure • Opening left and right cabin doors • Truck bed raises and lowers on two-stage cylinders • Opening engine compartment and engine detail • Front wheel steering with working linkage • Rear suspension • Tread and pattern detail on all visible metal surfaces • Transmission detail • "rock knockers" on rear tires • Removable wheel chocks included • Metal grab bars, railings, and other trim detail • Folding ladders • Authentic tire tread pattern High Line Series Packaging: Each model is surrounded by a die-cut foam insert within a collectible, full-color printed metal box which features actual machine photos and specifications. A cardboard outer box, which is printed with the stock number and description, adds further protection as well as easy identification of each item in your High Line Series collection.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

George Barris Dragula in GoldMade of diecast metalFeatures Include:• Opening hood• Accurate interior and chassis• Steerable front wheels• Detailed engine The DRAG-U-LA was created from a real fiberglass coffin equipped with a four-speed manual stick, 350hp Ford Mustang 289ci V-8 with dual four-barrel carbs, all fitted to a Mickey Thompson Ram-Thrust manifold. If you’re brave enough to hit the gas, the bone-shaking organ-pipe exhaust will wake the dead! The front of the vehicle sports a marble gravestone with the legend: “Born 1367, Died ?”. The royal purple driver seat is located under a plastic bubble in the rear of the coffin. In the spirit of all things fright’ning, this authentic spine-chilling 1:18 replica is dying to be added to your collection!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Liebherr MK 88-4.1 Mobile Construction Crane Features and Details: • Finely detailed diecast replica • All-wheel steering • Telescopic outriggers • Rotating upper carriage • Integrated assembly and load cable winch • Telescopic lattice tower with 3-part folding boom • Foldable guy blocks and guy rods • Trolley, crane hook, and winch included Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Mercedes-Benz Arocs with CIFA K36L Concrete Pump Features and Details: • 5-part folding mast • 360° rotating joint on last section • Steerable front axle • Double rear axle mounted on oscillating bearings • Swiveling front support and swiveling rear support Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

BKL - Liebherr LTM 1110 - 5.1 Mobile Crane Features and Details: • Steerable axles • Telescoping outriggers • Extendable support legs • Detailed operator's cab • Tilting operator's cab • Foldable access ladders • Detailed undercarriage • Upper carriage rotates 360° • Telescopic boom is lockable in three positions • Includes hook block and single line hook • Finely detailed graphics • Detailed grab rails and textured walking surfaces • Material box at rear • Maximum height with lattice jib reaches 165 cm or 65 inches Boom must be fully extended before being retractedEach Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1966 Pontiac GTO in Yellow and Black - Restomod Limited Edition - Estimated Production 750 Pieces Features Include: • Opening doors, trunk, and hood • Poseable steering • Plumbed and wired engine • Street fighter wheels and tires • Fully detailed chassis • Folding front seats By any calculation, 1966 was a momentous year for the GTO. The original muscle car had come into its own in persona and popularity. It even became a separate series featuring the hardtop, pillared sports coupe and convertible. The GTO's all-new body incorporated Coke-bottle side styling and a recessed backlight, with sail panels that provided a semi-fastback appearance. Graduating from the tough, boxy street brawler look of 1965, the '66 was refined with integrated shapes. Its front bumper became an integral part of the nose, closely following the curves of the newly sculpted split grilles and headlamp bezels. Parking lamps were set into the grilles à la the 1963 and 1964 Grand Prix's, and the grilles were blacked out--a muscle car styling cue that Pontiac initiated on the GTO in 1964 and would be used by much of its competition going forward. This lowered 66' GTO Restomod includes a killer custom paint job, with black street fighter wheels and tires. This is something you do not miss cruising on your downtown strip!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Mercedes-Benz Arocs 10x4 with Schwing S 51 SX Concrete Pump Features and Details: • Detailed superstructure • Fold-out boom • Steerable vehicle • Movable bumper • Support plates included • Steerable trailing axle

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Kenworth T880 SFFA Tandem with Lift Axle and McNeilus Bridgemaster Concrete Mixer in Radiant Red Features and Details: • Diecast metal replica • Opening doors • Detailed cab interior • Opening hood with detailed engine • Funtional steering • Chute extensions • Mixing drum rotates • Pliable rubber flaps • Fold-down access ladder

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Spiegl Transporte - Liebherr MK 88 Mobile Construction Crane Features and Details: • Finely detailed diecast replica • All-wheel steering • Telescopic outriggers • Rotating upper carriage • Integrated assembly and load cable winch • Telescopic lattice tower with 3-part folding boom • Foldable guy blocks and guy rods • Trolley, crane hook, and winch includedEach Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Thomen - Liebherr LTM 1110 - 5.1 Mobile Crane Features and Details: • Steerable axles • Telescoping outriggers • Extendable support legs • Detailed operator's cab • Tilting operator's cab • Foldable access ladders • Detailed undercarriage • Upper carriage rotates 360° • Telescopic boom is lockable in three positions • Includes hook block and single line hook • Finely detailed graphics • Detailed grab rails and textured walking surfaces • Material box at rear • Maximum height with lattice jib reaches 165 cm or 65 inches Boom must be fully extended before being retractedEach Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Sennebogen 818E Material Handling Machine Features and Details: • Steerable, oscillating axle • Stabilizers fold down • Upper carriage rotates 360° • Moavable boom, stick, and grabber • Detailed hose lines and rails • Detailed operator's cab Each Conrad model is custom designed from technical drawings of the real machine. Models are then hand assembled and detailed in Germany to the exacting specifications of clients around the world.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Scaffolding Set - Yellow with Barrel and Ladder - Plastic - Made in the USA using 3D printer technology

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Drag Outlaws - 1970 Pontiac GTO Judge "Justified" Limited Edition - Estimated Production 750 Pieces Features Include: • Opening doors, trunk, and hood • Poseable steering • New drag wheels and tires • Blown 455 engine • Drag parachute • Wheelie bars • Detailed undercarriage • Detailed interior with folding seats

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1968 Shelby GT500 Convertible in Acapulco Blue Features Include: • Opening doors, trunk, and hood • Removable top and boot • Poseable steering • Front folding seats • Plumbed and wired engine • Full chassis detailing

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Drag Outlaw - 1972 Hurst Oldsmobile 442 in White with Gold Stripes Limited Edition - Estimated Production 750 pcs Features and Details: • Opening doors and trunk • Poseable steering • New drag wheels and tires • Blown 455 engine • Drag Parachute • Detailed interior with folding seats• Wheelie bars• Detailed undercarriage *Sample Wheels - decoration will improve upon production

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Gruman F4F WildcatPostage Stamp CollectionThe Grumman F4F Wildcat is a carrier-based aircraft that was the primary fighter used by the United States Navy and Marine Corps in the Pacific Theater during the early part of World War II. With a top speed of 318 mph (F4F-4 variant), the Wildcat was generally outperformed by the faster, more maneuverable, and longer-ranged Japanese A6M Zero, but the Wildcat held its own with excellent survivability due to its rugged construction and robust armor.The F4F-4 entered service in 1941 with 6 machine-guns and the folding-wing system that enabled more planes to be stored in an aircraft carrier. It was the definitive Wildcat that saw the most combat service, including the Battle of Midway. The model is approximately 4 inches in length and has a 5 inch wingspan.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Scaffolding Set - Gray with Barrel and Ladder - Plastic - Made in the USA using 3D printer technology

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.