Items Available in Canada and from USA

Rat Fink T-Bucket - Mother's WorryLimited Edition - Estimated production 500 pcs Features Include: • Poseable Steering • Plumbed and Wired Engine • Custom purple metallic paint and white pin stripes• Figure and shifter• Wheel stand post (not shown)This model is based off of Ed Roth's famous "Mothers Worry" drawing, and a sticker of the original artwork is included with each model! It's a must have for any Rat fink collector or gear head!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Shake Rattle & Run Tribute - 1957 Chevrolet Bel Air GasserLimited Edition - Estimated Production 500 pcs Features and Details: • Opening doors, hood, and liftoff hood • Poseable steering • Injected drag engine • Straight axle front end • Detailed chassis • Cragar drag wheels and tires • Serialized plate first sample images - final product will vary slightyBack in 1959, Dick Messino and Eric Schmidt were hanging around a guy named Paul Cline. Cline had gotten a 1957 Chevrolet Bel Air for a graduation present. It was white with red and white interior, a power pack combo of a 220hp 283, and a 3-speed trans. It wasn't long after hanging out with Dick and Eric that the car was doing a lot of street racing.Shake, Rattle & Run '57 Sport Coupe became a feared Midwest drag strip staple for decades. Definitely an original "Axle Car"!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Yenko Super Cars - 1967 Chevrolet C-30 Ramp Truck in Silver Limited Edition - Estimated Production 400 pcs Features Include:• Sealed Diecast Body • Poseable Steering • Fully Detailed Interior • Adjustable Wheel Chocks • Slide Out Ramps • Detailed Chassis • Rubber Tires

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1969 Chevrolet Camaro Z/28 in Carolina Blue Limited Edition - Estimated Production 504 pcs Features Include:• Opening doors, trunk, and hood • Poseable steering • Detailed 427 engine • Detailed interior • Diecast metal body • Serialized plate Actual car photo, final production model may vary The third and final model year for the first-generation Chevrolet Camaro was 1969. It would also prove to be the highest production year of the first generation, with 243,085 copies leaving the factory. These 1969 Chevy Camaro Z/28's are believed to be two painted a rare special-order hue known as Carolina Blue (this was GMC fleet light blue). The Chevrolet Camaro for 1969 had a host of aesthetic changes, with front fenders, rear quarters, rear panel, header, valance, and doors all receiving design tweaks. Wheel wells were flattened for a more aggressive look, and the standard grille had a new look, with sharper angles. Outfitted with a high-revving 427 engine with dual exhausts, these Z/28 Camaros provided the driver with powerful performance.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1965 Shelby GT350R Prototype in White NEW TOOLING Limited Edition - Estimated Production 500 Pieces Features include: • Opening doors, hood and trunk • Poseable steering • Plumbed and wired engine • Race interior • Detailed undercarriage Actual car photo, final production model may varyWhile Shelby was diving deep into the the development of the GT40 for LeMans, he also had his sights on Ford's Mustangs. He wanted to turn Ford's secretary sports car into a track champion. So, Ford sent him three white K-code 1965 Mustangs. Serial number 5R002 would become the very first GT350R prototype and is arguably the most important Mustang in history! 5R002 would have multiple parts tested on it with drivers such as Ken Miles and Bob Bondurant behind the wheel, fenders widened by hand, the famous rear window designed by Peter Brock that let air escape, reverse hood scoop, and so much more! 5R002, aka the "Flying Mustang", would win its first race it ever entered on February 14,1965 with Ken Miles piloting the car to victory. Miles and others would compile 10 wins with 5R002 throughout the season with Jerry Titus capturing the SCCA B Production Championship for 1965!

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Don's Speed Shop - 1970 Dodge D-300 Ramp Truck Limited Edition - Estimated Production 400 pcs Features Include:• Sealed Diecast Body • Poseable Steering • Fully Detailed Interior • Adjustable Wheel Chocks • Slide Out Ramps • Detailed Chassis • Rubber Tires first sample images - final product will vary slighty Donald Glenn "Don" Garlits (born January 14, 1932, Tampa, Florida) is an American drag racing driver and automotive engineer and is considered the father of drag racing. He is known as "Big Daddy" to drag racing fans around the world. Always a pioneer in the field of drag racing, he perfected the rear-engine "top fuel dragster design", an innovation motivated by the loss of part of his foot in a dragster accident. This design was notably safer, since it put most of the fuel processing and rotating parts of the dragster behind the driver. The driver was placed in "clear air," in front of nearly all the mechanical components, thus protecting the driver and allowing him to activate a variety of safety equipment in the event of catastrophic mechanical failure or a fire. Garlits was also an early promoter of the full-body, fire-resistant driver's suit - complete with socks and gloves, often branded as Nomex. Garlits was the first drag racer to officially surpass the 170, 180, 200, 240, 250, and 270 miles per hour marks in the quarter mile; he was also the first to top 200 in the 1/8 mile. He has been inducted into several Halls of Fame and has won many awards during his career.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

#15 - 1964 Daytona Coupe - Dan Gurney for President Features and Details: • Opening doors, trunk, and hood • Fully plumbed and wired engine • Poseable steering • Detailed interior Produced by Shelby Collectibles The 12 Hours of Reims took place in July 1964. Dan Gurney and Bob Bondurant were at the wheel asthey had been during the historic winning effort at Le Mans. Gurney set the fastest GT qualifying timeduring the race. Unfortunately, a broken tail shaft on the transmission put the car out of the raceduring the 2nd hour. This Daytona would go down infamy by having the unique distinction of carrying the famous DanGurney for President stickers on the rear fenders of the car. The only time that this ever happened!The candidacy was initiated and supported by the ever popular Car and Driver magazine.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Rat Fink - 1961 Chevrolet Corvette Gasser in Metallic Gold with Rat Fink Graphics Limited Edition - Strictly Limited to 500 Pieces Features: • Opening doors and hood sides • Poseable steering • Plumbed and wired engine • Tilting front seats • Detailed undercarriage • Serialized plate This gasser is chromed out from the engine to the wheels and finished off with a bright gold metallic paint job! This model is based off of Ed Roth's famous "the Fugitive Vette" drawing.

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

1968 Chevrolet Camaro Z/28 - Drag Outlaws Limited Edition - Strictly Limited to 427 pcs Features and Details: • Opening doors and trunk • Removeable hood • Poseable steering • Wired and plumbed big block 496 • Tilting front seats • Nitrous bottle • Wheelie bar and parachute included

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

#36 Original Mazmanian - 1961 Chevrolet Corvette Gasser Estimated Production - 500 Pieces Features and Details: • Opening doors and trunk • Removable hood • Blown 238 fuelie engine • Custom headers • 5-spoke drag wheels and tires • Parachute pack • Poseable steering • Cloth seat belts • Detailed chassis

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Southern Speed & Marine - 1970 Chevrolet C-30 Wrecker in Black Strictly Limited to 402 pcs Features Include: • Opening doors • Detailed interior • Front bumper push guard • Red lights mounted on boom frame • Winch controls • Tow hooks • Wheel lift • Twin boom • Dual rear wheels

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Drag Outlaws - 1970 Pontiac GTO Judge "Justified" Limited Edition - Estimated Production 750 Pieces Features Include: • Opening doors, trunk, and hood • Poseable steering • New drag wheels and tires • Blown 455 engine • Drag parachute • Wheelie bars • Detailed undercarriage • Detailed interior with folding seats

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Allan Moffat Racing - 1970 Ford F-350 Ramp Truck - Brut Limited Edition - 700 pcs Features include: • Sealed diecast body • Poseable steering • Fully detailed interior • Adjustable wheel chocks • Slide out ramps • Detailed chassis • Rubber tires • Limited edition

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Tasca Ford - 1970 Ford F-350 Ramp TruckLimited Edition - 750 pcs Features include: • Sealed diecast body • Poseable steering • Fully detailed interior • Adjustable wheel chocks • Slide out ramps • Detailed chassis • Rubber tires

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.

Harvey Ford / Dyno Don - 1965 A/FX Mustang Limited Edition - Estimated Production 750 Pieces Features and Details: • Opening doors, trunk, and lift off hood • Poseable steering • Tilting front seats • Roll cage • Plumbed and wired engine • Parachute • Drag wheels and tires • Serialized plate

Note any reference to MSRP MAP above in description are to be ignored. They represent USA $ pricing and are not valid for Canadian prices.